P-52 Transfer Pump
P-52 Transfer Pump
High Output Transfer of Foam and Coatings Chemical Systems
Made in the USA, the lower-height higher output P-52 can transfer 10 gallons per minute in continuous service.
- Fits in standard 7’ high trailers – lower height
- Made in the USA
- High Output 10 gpm – doubling competitive brands
- Same spare parts as the GHO and IPM OP232C
- Stainless Steel Construction
- Wetted and Divorced Fluid Section – lowers are exposed to chemicals
- Outperforms regular feed pumps – made polyurethane chemicals
The robust design of the GHO returns improved in the P-52; a reliable, stainless steel, high output pump that fits inside a standard 7’ high trailer. The 10 gallons per minute continuous duty flow rate of the P-52 ensures that every proportioner is supplied with incoming material to fit its capacity.
Technical Specifications
P-52
Pressure Ratio
2.2:1
Output
10 GPM (37.85 LPM)
Cycles per Gallon
3.79
Cycles per Liter
7
Stroke Length
4″ (10.2 cm)
Maximum Air Pressure
120 psi (8.273 bar)
Air Inlet
1/4 NPT (F)
Fluid Output
3/4 NPT (F)
Air Consumption
2.2 CFM per gal @ 100 PSI (275 cc/s per liter @ 7 bar)
Weight
25 lbs (11.4 kg)
