PFX-1600 Pneumatic Proportioner for Coatings

The PF/PFX-1600 Series utilizes the efficiencies of today’s pneumatic and heating technology in order to reduce the air and power consumption to create a new platform that is good for both entry-level and seasoned applicators. The electrical console has been redesigned to eliminate the use of delicate circuit boards and displays. Recirculation valves are standard on the PF and PFX. Inlet Monitoring (IM) and Pressure Balance Control (PBC) are options.


(Output measured with Mineral Oil)

1.3 gal/min (4.92 liters/min)
Max Working Pressure
3,000 psi (207 bar)
Max Hose Length
210 ft (64m) w/70V Trans 310 ft (94.5 m) w/90V Trans
Heater Wattage (Total)
10,500 watts (single htr)
12,000 watts (single htr)
Hose Heating Power
30 V, 70 V or 90 Volts
Max Fluid Temperature
190 °F (87.7 °C)
Air Consumption
@ 100 psi (6.9 bar)
15-20 scfm (425-567 L/min)
Main Voltage
1 x 230V, 50/60Hz
Electrical @230V Single Phase
56A–10,500W heaters
62A–12,500W heaters
+5A for 90V Trans
Main Voltage
3 x 230V, 50/60 Hz,
3 x 380V, 50/60 Hz
Electrical @230V Three Phase
33A–10,500W heaters
37A–12,000W heaters
+3A for 90V Trans
26.5”w x 38”d x 21.5” h
(67cm x 97cm x 55cm)
160 lbs (73.6 kg)